Fridge water hook up
Tighten the packing nut and the pipe clamp screws so the washer makes a watertight seal. Find your water supply lines beneath your sink.
Was this content helpful? MORE Adapt-A-Tees are easy to install, and they provide the extra line you need with the least amount of work possible. If the refrigerator has a water dispenser, flush out several Normally the compression fittings come with the fridge. Create your Samsung Account First Name. Figure 6 to 8 ft.
Installing The Water Line
Please help us improve by selecting a reason below. Turn water on and check for any leakage. Turn the water supply valve on and check for leaks. If you have been holding the dispenser lever for over 3 minutes and water is not being dispensed, verify that water supply valve is open and that power is being supplied to the unit. Log in with Google.
Required Tools for this Project
Continue to 5 of 7 below. If the refrigerator is installed in an area with low water pressure below 20psiyou should install a booster pump to compensate for the low pressure.
Connect the Tee Adapter. Once the assembly has cooled, close the new valve and open the water main to check the fittings for leaks.
Slip the remaining compression nut and ferrule over the refrigerator end of the new water line. If you need to drill through floors or walls, check for air ducts, electrical wiring, plumbing or other possible hurdles first. MORE water leakage as you remove the valve—this is just the standing water in the water pipe, and it can easily be sponged up. In this kitchen, we ran the new refrigerator water line from under the kitchen sink through cabinets.
How would you like to contact us?
To install the water line, follow the steps below: Before you cut the tubing to its fridge water hook up length, make sure you have 6 to 8 ft. It can be very inconvenient to move a refrigerator to get at a water line that has failed, so buy the best-quality water supply tube you can.
If so, your job is very easy.
If you are a mobile dealer creating an account for the first time, click here. Do not twist the nuts too tight as this could damage the supply valve, the supply line and the adapter. Be sure to keep the tubing above storage areas and behind drawers if possible to avoid fridge water hook up damage. Turn off the main water supply and open the nearest faucet long enough to relieve pressure. Log in with your Samsung Account Email Address.
Plumb the fridge
Test the water pressure by dispensing water into a measuring cup for 10 seconds. Then decide which one of three water line connection options you will use: Turn on the cold water faucet to drain any water left in the supply line.
Before connecting the tubing to the refrigerator, be sure the power cord is not plugged into the outlet. To straighten coiled tubing not the entire rollhave a partner hold the end of the tube flat on the floor, then push the roll against the floor while unrolling to the length you need to go through the cabinets.
Looks like you are already a Samsung. Let us guide you through the process. Twist the male end of a quick-tee adapter onto the valve.
- Hook up with hotel employee
- Dating websites for over 50 free
- Who is dating justin bieber in 2014
- Dating sites in murfreesboro tn
- Dating sparks
- Hookup from tinder
- Gay dating advice first date
- What is the difference between casual dating and friends with benefits
- Free dating site in malaysia
- Dating how long between dates
- Dating nervex lugs
- Taurus woman dating a scorpio man